Veröffentlichungen

@article{Pohl.2016c,

title = {Primary energy savings of a modular combined heat and power plant based on high temperature proton exchange membrane fuel cells},

author = {Elmar Pohl and Pascal Meier and Marius Maximini and Jörg Schloß},

doi = {10.1016/j.applthermaleng.2016.05.055},

issn = {13594311},

year  = {2016},

date = {2016-01-01},

journal = {Applied Thermal Engineering},

volume = {104},

pages = {54--63},

keywords = {CHP, Primary Energy Savings},

pubstate = {published},

tppubtype = {article}

}

@article{Pohl.2014,

title = {A method to determine primary energy savings of CHP plants considering plant-side and demand-side characteristics},

author = {Elmar Pohl and David Diarra},

doi = {10.1016/j.apenergy.2013.07.038},

issn = {03062619},

year  = {2014},

date = {2014-01-01},

journal = {Applied Energy},

volume = {113},

pages = {287--293},

abstract = {Cogeneration or combined heat and power (CHP) is considered as an important key technology towards efficient energy supply. While CHP is used in industrial systems for a long time, in domestic energy supply CHP technologies are penetrating recently. Domestic energy supply systems with CHP plants differ in plant-side and demand-side characteristics. The effects of feed-in of CHP generated electricity is analyzed in detail. In this paper we develop an assessment method for primary energy savings by means of a primary energetic comparison of a coupled supply system with a separated supply system. The plant-side power to heat ratio and the demand-side power to heat ratio are discussed as important parameters for primary energy savings. The method leads to a theoretical potential of primary energy savings, which only depends on plant-side characteristics. The technical potential of primary energy savings is the consequence of both, plant-side and demand-side, characteristics.},

keywords = {CHP, Primary Energy Savings},

pubstate = {published},

tppubtype = {article}

}

@article{Pohl.2014b,

title = {Assessment of primary energy savings by means of CHP systems in domestic energy supply},

author = {Elmar Pohl and David Diarra},

doi = {10.1016/j.applthermaleng.2013.12.021},

issn = {13594311},

year  = {2014},

date = {2014-01-01},

journal = {Applied Thermal Engineering},

volume = {71},

number = {2},

pages = {830--837},

abstract = {In this paper the assessment of primary energy savings of combined heat and power (CHP) systems is described by a primary energetic comparison of a coupled supply system (CHP plant, boiler and power plant) with a separated supply system (boiler and power plant). The plant-side power to heat ratio and the demand-side power to heat ratio are discussed as important system parameters for primary energy savings. The method suggests a theoretical potential of primary energy savings, which depends on plant-side characteristics only. The technical potential of primary energy savings is the consequence of plant-side and demand-side characteristics. In this paper an example application is presented for dynamic simulation of two different insulation standards in Germany, using the reference load profiles of the German technical guideline VDI 4655.},

keywords = {CHP, Primary Energy Savings},

pubstate = {published},

tppubtype = {article}

}

@article{HaasWittmu.2010,

title = {Micro Scale combined Heat and Power System for liquid fuels},

author = {Hans Richard Haas-Wittmüß and Lars Paesler and Rishi Pillai and G. Yildiz and Jörg Schloß and Klaus Lucka and Heinrich Köhne and F. J. Schulte},

doi = {10.1179/174327809X397811},

issn = {2150-3621},

year  = {2010},

date = {2010-01-01},

journal = {International Journal of Energy for a Clean Environment},

volume = {11},

number = {1-4},

pages = {163--176},

keywords = {CHP},

pubstate = {published},

tppubtype = {article}

}