Konferenzbeiträge

Hier finden Sie eine Übersicht der Konferenzbeiträge, die aufgrund von Vorträgen durch Mitarbeiter des OWI Oel-Waerme-Instituts veröffentlicht wurden.

  • M. Grote, E. Pohl, P. H. Saptogino, D. Diarra
    Impact of Solid Body Emissivity on Radiative Heat Transfer Efficiency in Furnaces – A Numerical Study, 11th European Conference on Industrial Furnaces and Boilers (Infub-11), 18. – 21. April 2017, Albufeira – Algarve – Portugal

    P. H. Saptogino, M. Grote, R. Herrmanns, D. Diarra
    Modelling of Mass Evaporation Behaviour of Single and Multi-Component Fuels Under Combustion Conditions in Pool Fires, 8th European Combustion Meeting 2017, 18 – 21 April 2017 in Dubrovnik, Croatia

    M. Grote, E. Pohl, P. H. Saptogino, D. Diarra
    Einfluss der Emissivität auf die Effizienz der Strahlungswärmeübertragung in Öfen, Jahrestreffen der ProcessNet-Fachgruppen Abfallbehandlung und Wertstoffrückgewinnung, Energieverfahrenstechnik, Gasreinigung, Hochtemperaturtechnik, Rohstoffe und Kreislaufwirtschaft, 21. – 23. März 2017, Frankfurt

  • H. Hoffmann, S. Feldhoff; W. Koch, K. Lucka
    Internal Diesel Injector Deposits: Investigations with the non-Engine test “ENIAK”, In: Tschöke, Helmut; Marohn, Ralf (Hg.): Diesel- und Benzindirekteinspritzung mit Special Session Gaseinblasung – 10. Tagung, Springer Fachmedien 2016, S. 269–280, ISBN 978-3-658-15326-7

    H. Hoffmann, S.Feldhoff, W. Koch, K. Lucka
    Injector Deposit Test Method for Alternative Fuels: ENIAK, 4th International Conference „Tailor-Made fuels from Biomass“, June 21st-June 23rd 2016, Aachen

    M. Grote, D. Diarra, E. Pohl
    Impact of solid body emissivity on radiative heat transfer efficiency in furnaces – a numerical study, 11th European Conference on Industrial Furnaces and Biolers (INFUB-11) 18. – 21. April 2017, Albufeira – Algarve – Portugal

  • N. Kleinohl, P. Nehter, A. Bauschulte, J. vom Schloß, J. Bøgild Hansen
    SOFC fed with European standard road diesel by an adiabatic pre-reforming fuel processor for 1000 hours, 6th European Fuel Cell Technology & Applications Piero Lunghi Conference – EFC15, 16. – 18. December 2015, Naples, Italy

    S. Voss, F. Rau, V.A. Alekseev, A.A. Konnov, R. Haas-Wittmüß, R.T.E. Hermanns, E. Volkov, L.P.H. de Goey
    A comparative study of laminar burning velocities of methane, methanol and ethanol investigated using the Heat Flux method, ECM 2015 7th European Combustion Meeting, 30th March – 2nd April 2015, Budapest, Hungary

    L. Paesler, F. Schlösser
    Performance characterisation of catalytic combustion with liquid hydrocarbons based on temperature measurements and emission analysis, ECM 2015 7th European Combustion Meeting, 30th March – 2nd April 2015, Budapest, Hungary

    H. Hoffmann, W. Koch, K. Lucka
    A Novel Injector Deposit Fuel Test Method: “ENIAK”, ECM 2015 7th European Combustion Meeting, 30th March – 2nd April 2015, Budapest, Hungary

    R. Haas-Wittmüß, R.T.E. Hermanns
    Measurements of the laminar Burning Velocity of Ethanol-Water-Air Mixtures, ECM 2015 7th European Combustion Meeting, 30th March – 2nd April 2015, Budapest, Hungary

    W. Koch, K. Lucka
    Experimental Investigations and Theoretical Modeling of the Vaporization Characteristics of Liquid Fuels, 10th International Colloquium Fuels – Conventional and Future Energy for Automobiles, 20. – 22. Januar 2015, Ostfildern/ Stuttgart

    S. Feldhoff, W. Koch, K. Lucka
    Stability and Combustion Characteristics of Middle Destillate Blends with Hydrotreated Vegetable Oil, 10th International Colloquium Fuels – Conventional and Future Energy for Automobiles, 20. – 22. Januar 2015, Ostfildern/ Stuttgart

    H. Hoffmann, H. vom Schloß, K. Lucka
    Development of a Non-Engine Injector Deposit Fuel Test: Results, 10th International Colloquium Fuels – Conventional and Future Energy for Automobiles, 20. – 22. Januar 2015, Ostfildern/ Stuttgart

  • N. Kleinohl, J. Bøgild Hansen, P. Nehter, H. Modarresi, A. Bauschulte, J. vom Schloß, K. Lucka
    SOFC fed with European standard road diesel by an adiabatic pre-reforming fuel processor, 11th European SOFC & SOE Forum EFCF 2014. 01. – 04. Juli 2014, Luzern, Schweiz

    H. Hoffmann, H. vom Schloss
    ENIAK – Entwicklung eines nichtmotorischen Injektorprüfstands: Erfahrungen und erste Ergebnisse, 8. Rostocker Bioenergieforum, 18. – 19. Juni 2014, Rostock

    E. Pohl, J. vom Schloß, A. Bauschulte, M. Maximini
    Novel approach for degradation modeling of HT-PEM fuel cells using dual time scale simulation, Book of Abstracts, 11th Symposium for Fuel Cell and Battery Modeling and Experimental Validation, 17. – 19. März 2014, Winterthur, Schweiz, ISBN: 978-80-263-0576-7

  • P. Engelhardt, M. Maximini, F. Beckmann, M. Brenner
    Coupled operation of a diesel steam reformer and a polymer electrolyte fuel cell, 2013 AIChE Annual Meeting, 3. – 7. November 2013, San Francisco, USA

    M. Maximini, P. Engelhardt, M. Brenner, H.-G. Anfang
    Optimization of the Start-Up Strategy for a Diesel Fuel Processor, 2013 AIChE Annual Meeting, 3. – 7. November 2013, San Francisco, USA

    R.T.E. Hermanns
    Vaporisation and liquid fuel combustion, JMBC Course on Combustion, 1st November 2013, Eindhoven, The Netherlands

    D. Diarra, R.T.E. Hermanns
    Characterizing ignition behavior of Primary Reference Fuels by numerical stability analysis of detailed reaction mechanisms, Combura 2013, 09 – 10th October 2013, Maastricht, The Netherlands

    W. Karsten, M. Goy, H. vom Schloß
    Kompakter und regelbarer Diesel- Vollstrombrenner zur Regeneration von Partikelfiltern bei NRMM-Anwendungen – Darstellung der Entwicklungen und Ergebnisse, 26. Deutscher Flammentag, 11. – 12. September 2013, Duisburg

    D. Diarra, K. Lucka
    Stabilitätsanalyse detaillierter Reaktionsmechanismen für die Erzeugung von Kohlenwasserstoff-Luft-Gemischen jenseits der Selbstzündtemperatur, 26. Deutscher Flammentag, 11. – 12. September 2013, Duisburg

    L. Paesler, R. Haas-Wittmüß, R.T.E. Hermanns, K. Lucka
    Untersuchung des Freistrahlverhaltens von Vormischflammen mit rekuperativer Luftvorwärmung in einer Trockenbrennkammer, 26. Deutscher Flammentag, 11. – 12. September 2013, Duisburg

    Z. Yang, S. Hackhofer, R.T.E. Hermanns, K. Lucka
    Simulationsgestützte Analyse und Optimierung eines ölbetriebenen Verbrennungssystems für eine Mikro-KWK-Anlage, 26. Deutscher Flammentag, 11. – 12. September 2013, Duisburg

    P. Engelhardt, M. Maximini, F. Beckmann, M. Brenner
    Coupled operation of a diesel steam reformer and a PEFC, Proceedings of 4th European PEFC & H2 Forum 2013, 02. – 05. July 2013, Luzern, Switzerland

    M. Maximini, P. Engelhardt, M. Brenner, H.-G. Anfang
    Operation strategy of a Diesel fuel processor for fast start-up, Proceedings of 4th European PEFC & H2 Forum 2013, 02. – 05. July 2013, Luzern, Switzerland

    N. Kleinohl, J. Bøgild Hansen, P. Nehter, H. Modarresi, A. Bauschulte, J. vom Schloß, K. Lucka
    Pre-reforming of middle distillate hydrocarbons as fuel processing technology for high temperature fuel cells, EFCF Proceedings of 4th European PEFC & H2 Forum 2013, 02. – 05. July 2013, Luzern, Switzerland

    S. Hackhofer, R.T.E. Hermanns, Z. Yang
    Influence of the Swirler Design on the Combustion Behavior of Prevaporized Liquid Fuel, ECM 2013 – European Combustion Meeting, 25. – 28. Juni 2013, Lund, Sweden

    D. Diarra, K. Lucka, H. Köhne
    Mathematical analysis of stabilized cool flames using detailed reaction mechanisms, ECM 2013 – European Combustion Meeting, 25. – 28. Juni 2013, Lund, Sweden

    H. Hoffmann, W. Koch
    Stability of liquid fuels with biogenic content, ECM 2013 – European Combustion Meeting, 25. – 28. Juni 2013, Lund, Sweden

    R. Haas-Wittmüß, R.T.E. Hermanns
    Adaptation of the Heat Flux Method for the Measurement of Adiabatic Laminar Burning Velocities of Liquid Fuels, ECM 2013 – European Combustion Meeting, 25. – 28. Juni 2013, Lund, Sweden

    H. Hoffmann, H. vom Schloß
    ENIAK – Entwicklung eines nichtmotorischen Injektorverkokungsprüfstandes für alternative Kraftstoffe, 7. Rostocker Bioenergieforum, 20. – 21. Juni 2013, Rostock

    M. Neulen, H. Hoffmann
    Anwendungseigenschaften flüssiger Brennstoffe mit biogenen Anteilen (DGMK-Projekt 729), 7. Rostocker Bioenergieforum, 20. – 21. Juni 2013, Rostock

    S. Feldhoff, W. Koch, H. Hoffmann, H. vom Schloß
    Stability and combustion characteristics of liquid fuels with biogenic content, 21st European Biomass Conference and Exhibition, 03. – 07. Juni 2013, Copenhagen, Denmark

    N. Kleinohl, J. Bøgild Hansen, P. Nehter, H. Modarresi, A. Bauschulte, J. vom Schloß, K. Lucka
    Pre-reforming of middle distillate hydrocarbons as fuel processing technology for high temperature fuel cells, 5th International Conference on Fundamentals & Development of Fuel Cells (FDFC 2013), 16. – 18. April 2013, Karlsruhe

    E. Pohl, D. Diarra
    Assessment method for primary energy savings of CHP systems in domestic energy supply, Microgen III: Proceedings of The 3rd edition of the International Conference on Microgeneration and Related Technologies, 15. – 17. April 2013, Naples, Italy, ISBN: 9788890848902

    S. Gopal Yaji, D. Diarra
    Operating strategy of a solid oxide fuel cell for household demand profile, Microgen III: Proceedings of The 3rd edition of the International Conference on Microgeneration and Related Technologies, 15. – 17. April 2013, Naples, Italy, ISBN: 9788890848902

    E. Pohl, D. Diarra
    Primärenergieeinsparung durch KWK-Anlagen am Beispiel der häuslichen Energieversorgung, VDI Expertenforum: „Wie ,smart` managen wir Energie wirklich?“, 19. – 20. März 2013, Karlsruhe

    N. Kleinohl, J. B. Hansen, P. Nehter, H. Modarresi, A. Bauschulte, J. vom Schloß, K. Lucka
    Pre-reforming of middle distillate hydrocarbons as fuel processing technology for high temperature fuel cells, ProcessNet Jahrestreffen der Fachgruppe Energieverfahrenstechnik, 18. – 19. März 2013, Würzburg

    W. Koch, H. Hoffmann, H. vom Schloß
    Stability of liquid fuels with biogenic content, 9th International Colloquium Fuels – Conventional and Future Energy for Automobiles, 15.-17. Januar 2013, Stuttgart, Seiten 261-271, ISBN: 98-3-943563-04-7

    M. Neulen, H. vom Schloß
    Application characteristics of fuels with biogenic components, 9th International Colloquium Fuels – Conventional and Future Energy for Automobiles, 15.-17. Januar 2013, Stuttgart, Seiten 255-257, ISBN: 98-3-943563-04-7

    H. Hoffmann, H. vom Schloß
    Development of a Non-Engine Fuel Injector Deposit Test for Alternative Fuels, 9th International Colloquium Fuels – Conventional and Future Energy for Automobiles, 15.-17. Januar 2013, Stuttgart, Seiten 613-615, ISBN: 98-3-943563-04-7

  • H. Ackermann, R. Pillai, S. Richter
    Chromverlust und Verhalten der Karbide bei der Oxidation von karbidgehärteten Ni-Hochtemperaturlegierungen, 35. Vortragsveranstaltung „Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe“ der Forschungsvereinigungen Warmfeste Stähle und Hochtemperaturwerkstoffe, 30. November 2012, Düsseldorf

    L. Paesler, R. Haas-Wittmüß, M. Heise, J. vom Schloß
    Entwicklung eines modulierenden Vormischbrenners für flüssige Brennstoffe zum Einsatz im WhisperGen® Stirlingmotor, 7. Ölwärme-Kolloquium 2012, Aachen, 26. – 27. September 2012

    H. vom Schloß, K. Ritte1, M. Dzubiella, A. Stark, D. Kreutzmann, M. Grote,
    Entwicklung eines modulierenden Heizöl EL-Brenners für den Einsatz in einem Zeolith-Kompakt-Heizgerät, 7. Ölwärme-Kolloquium 2012, Aachen, 26. – 27. September 2012

    W. Karsten, T. Winter, M. Goy, H. Pohland vom Schloß, P. Grütter
    Entwicklung eines kompakten und regelbaren Diesel-Vollstrombrenners zur Regeneration von Partikelfiltern bei NRMM- Anwendungen (Nichtstraßengebundene bewegliche Maschinen und Geräte – Non-road mobile machinery) , 7. Ölwärme-Kolloquium 2012, Aachen, 26. – 27. September 2012

    S. Seehack, O. van Rheinberg,
    Betriebssicherheit und Stabilitätskriterien für Heizöl EL mit Fettsäuremethylester, Ergebnisse und Erkenntnisse, 7. Ölwärme-Kolloquium 2012, Aachen, 26. – 27. September 2012

    H. Ackermann, R. Pillai
    HT-LifePLUS – Lebensdauerbewertungsverfahren für korrosiv, thermisch und mechanisch beanspruchte Bauteile bis 1200 °C, 7. Ölwärme-Kolloquium 2012, Aachen, 26. – 27. September 2012

    E. Pohl, D. Diarra
    Methodik zur Bewertung der Primärenergieeinsparung von KWK-Anlagen am Beispiel der häuslichen Energieversorgung, 7. Ölwärme-Kolloquium 2012, Aachen, 26. – 27. September 2012

    Pedro Nehter, Hassan Modarresi, Nils Kleinohl, John Bøgild Hansen, Ansgar Bauschulte, Jörg vom Schloss, Klaus Lucka
    Adiabatic Prereforming of ultra-low sulfur diesel: Potential for marine SOFC-Systems and experimental results, European Fuel Cell Forum 2012, 26. – 29. Juni 2012, Luzern, Switzerland

  • H. Hoffmann, N. Dohn, O. van Rheinberg
    Use of n-butanol as biocomponent in domestic heating oil: Parameter study and practical test, COMBURA‘11 – Combustion Research and Application, 10.-11. Oktober 2011, Ede (NL)

    O. van Rheinberg
    Long term storage stability of heating oil with FAME as biocomponent, 5. Internationale Konferenz „Biodiesel“, 06.-07. Oktober 2011, Berlin

    H. Ackermann, M. Kleingries, T. Hoja, A. Mehner, K. Lucka, H.-W. Zoch, D. Kreutzmann
    Metal dusting in case hardening furnaces – Alloy resistance and effect of ceramic coating,ECCE 2011 – 8th European Congress of Chemical Engineers + ProcessNet-Annual Meeting, 25. – 29. September 2011, Berlin

    Z. Yang, M. Grote, D. Diarra, K. Lucka, H. Köhne
    Numerical modeling of multicomponent droplet evaporation with CFD-software Open-FOAM,First ERCOFTAC Conference on: Simulation of Multiphase Flows in Gasification and Combustion, 18. – 20. September 2011, Dresden

    S. Hackhofer, L. Paesler, M. Grote, R. T. E. Hermanns, J. vom Schloß
    Numerical and experimental analysis of the formation of nitrogen oxides during the catalytic combustion of liquid fuels,Clean Air 2011 – 11th Conference on Energy for a Clean Environment, 05. – 08. July 2011, Lisbon, Portugal

    D. Diarra, R. T. E. Hermanns, K. Lucka
    Numerical and experimental investigation of the stability limits of hydrocarbon-air mixtures beyond the auto ignition temperature, Clean Air 2011 – 11th Conference on Energy for a Clean Environment, 05. – 08. July 2011, Lisbon, Portugal

    P. Engelhardt, M. Maximini, M. Grote, F. Beckmann, M. Brenner, K. Lucka
    Optimization of a diesel steam reformer and coupled operation with a PEM fuel cell, Clean Air 2011 – 11th Conference on Energy for a Clean Environment, 05. – 08. July 2011, Lisbon, Portugal

    D. Diarra, K. Lucka, H. Köhne
    Experimental Observation and Mathematical Interpretation of Self Ignition during Mixture Preparation for Liquid Fuels, The 5th European Combustion Meeting – ECM 2011, June 29 – July 01, 2011, Cardiff, GB

    R. Haas-Wittmüß, L. Paesler, J. vom Schloß, K. Lucka, F. J. Schulte
    Micro Scale Combined Heat and Power System for Liquid Fuels, The 5th European Combustion Meeting – ECM 2011, June 29 – July 01, 2011, Cardiff, GB

    M. Maximini, M. Grote, P. Engelhardt, M. Brenner
    Further development of a compact steam reformer for diesel fuel,EFCF 2011 – European Fuel Cell Forum, June 28 – July 1, 2011, Lucerne, Switzerland

    P. Engelhardt, M. Maximini, F. Beckmann, M. Brenner
    Integrated fuel cell APU based on a diesel steam reformer and a PEM fuel cell, EFCF 2011 – European Fuel Cell Forum, June 28 – July 1, 2011, Lucerne, Switzerland

    T. Huck, P. Engelhardt, K. Lucka
    Highly integrated micro fuel cell system based on a methanol steam reformer and a HT-PEM fuel cell, European Fuel Cell Forum – EFCF 2011, June 28 – July 1, 2011, Lucerne, Switzerland

    N. Kleinohl, A. Bauschulte, K. Lucka
    Pre-reforming of liquid hydrocarbons at atmospheric pressure,European Fuel Cell Forum – EFCF 2011, June 28 – July 1, 2011, Lucerne, Switzerland

    H. Dirks, O. van Rheinberg, K. Lucka
    Utilisation of FAME-domestic heating oil-blends up to 20 Vol. % in household heating application – Deposit formation in premixed burner technologies and storage stability, 19th European Biomass Conference and Exhibition – From Research to Industry and Markets, June 6-10, 2011, Berlin

    M. Maximini, P. Engelhardt, M. Grote, M. Brenner
    Further development of a compact steam reformer for diesel fuel,HFC – Hydrogen + Fuel Cells 2011 International Conference and Exhibition, 15. – 18. May 2011, Vancouver, Canada

    P. Engelhardt, B. Kutsch, M. Maximini, F. Beckmann, M. Brenner
    Integrated fuel cell APU based on a compact steam reformer for diesel and a PEM fuel cell,HFC – Hydrogen + Fuel Cells 2011 International Conference and Exhibition, 15. – 18. May 2011, Vancouver, Canada

    R. Haas-Wittmüß, L. Paesler, J. vom Schloß, K. Lucka, F. J. Schulte
    Micro Scale Combined Heat and Power System for Liquid Fuels, MICRoGEN‘II – The 2nd International Conference on Microgeneration and Related Technologies, 04. – 06. April 2011, University of Strathclyde, Glasgow

  • O. van Rheinberg, K. Lucka
    About the process improvement of adsorptive desulphurisation by adding hydrogen donators as additives in liquid fuels, Fuel Cells Science & Technology, 06. – 07. October 2010, Zaragoza, Spain, www.fuelcelladvances.com

    M. Grote, M. Maximini, Z. Yang, P. Engelhardt, D. Wichmann, M. Brenner
    Experimental and computational investigations of a compact steam reformer for fuel oil and diesel fuel, Fuel Cells Science & Technology, 06. – 07. October 2010, Zaragoza, Spain, www.fuelcelladvances.com

    P. Engelhardt, B. Kutsch, D. Wichmann, K. Lucka, M. Duisberg, M. Brenner
    Operating an integrated fuel processor based on steam reforming of Liquid Fuels for polymer fuel cells with an electric power output of up to 4 kW, Fuel Cells Science & Technology, 06. – 07. October 2010, Zaragoza, Spain, www.fuelcelladvances.com

    M. Maximini, T. Huck, R. Wruck, K. Lucka
    Investigations of steam reforming catalysts for fuel oil and diesel, EnergieAgentur NRW: 18th World Hydrogen Energy Conference (WHEC 2010), 16. – 21. Mai 2010, Messe Essen, www.whec2010.com

  • M. Kleingries, H. Ackermann, H. Köhne, K. Lucka, T. Hoja, A. Mehner, F. Hoffmann, H.-W. Zoch
    Metal Dusting Resistance of high Temperature Steels and Nickel-base Alloys for structural Components of Heat Treatment Furnaces with Carbonaceous Atmospheres, The European Corrosion Congress (EUROCORR 2009), 06. – 10. September 2009, Book of Abstracts, Seite 46, Nice, France

    R. Haas-Wittmüß, L. Paesler, R. Pillai, G. Yildiz, J. vom Schloß, F. J. Schulte, K. Lucka, H. Köhne
    Micro Scale Combined Heat and Power System for Liquid Fuels, 10th International Conference on Energy for a Clean Environment – Clean Air 2009, 07. – 09. July 2009, Book of Abstracts, Seite 72, Lisboa, Portugal

    R. Edenhofer, K. Lucka, H. Köhne
    Particulate Matter Emission from Oil Fired Domestic Heating Appliances, 10th International Conference on Energy for a Clean Environment – Clean Air 2009, 07. – 09. July 2009, Book of Abstracts, Seite 75, Lisboa, Portugal

    L. Paesler, J. vom Schloß, C. Jaschinski, K. Lucka, H. Köhne, L. Kulisiewicz, S. Ausmeier, A. Delgado
    PyrInno: Practical results of a small scale burner development, 10th International Conference on Energy for a Clean Environment – Clean Air 2009, 07. – 09. July 2009, Book of Abstracts, Seite 77, Lisboa, Portugal

    J. vom Schloss, A. Bauschulte, K. Lucka, H. Köhne
    Thermal Use of SOFC Exhaust Gases: Practical Experiences with Non-Catalytic Systems, European Fuel Cell Forum 2009, June 26- July 2, Lucerne, Switzerland

    H. Pohland vom Schloß, G. Niu, K. Lucka, H. Köhne
    Vaporisation of heating oil and diesel at high pressure using cool flame phenomena, 4th European Combustion Meeting 2009 – ECM 2009, 14.-17. April 2009, Book of Abstracts, Vienna, Austria, Paper number: 810-135, p. 335

    M. D. Boot, C. C. M. Luijten, R.S.G. Baert, R. Edenhofer, H. Dirks, K. Lucka, H. Köhne
    Sooting Behavior of Oxygenated Fuels in a Diffusion Burner, 4th European Combustion Meeting 2009 (ECM 2009), 14. – 17. April 2009, Book of Abstracts, Vienna, Austria, Paper number: 810-165, p. 174

    A. Medeiros, R. T. E. Hermanns, R. Edenhofer, K. Lucka, H. Köhne
    Sensitivity study of the low temperature oxidation, 4th European Combustion Meeting (ECM 2009), 14. – 17. April 2009, Book of Abstracts, Vienna, Austria, Paper number: 810-154, p. 336

    D. Diarra, J. Lukito, K. Lucka, H. Köhne
    Experimental Analysis and Mathematical Interpretation of Spontaneous Ignition in an n-Heptane Cool Flame Reactor, 4th European Combustion Meeting (ECM 2009), 14. – 17. April 2009, Book of Abstracts, Vienna, Austria Paper number: 810-327, p. 339

    A. Mehner, H. Ackermann, M. Kleingries, K. Lucka, H. Köhne
    Protective Sol-Gel Coatings against High Temperature Corrosion of Steels and Nickel Alloys due to Metal Dusting Europäische Konferenz für Wärmebehandlung, Eureopean Days 2009 in Strasbourg „Materials and Treatments for Energy Production Installations“, 19./20. März, Strasbourg, France

  • B. Kutsch, D. Wichmann, K. Lucka, H. Köhne, A. Nakajo, J. van Herle, D. Favrat
    Simulation and validation of SOFC-stack,5th Symposium on Fuel Cell Modelling and Experimental Validation, 11. – 12. March 2008, Book of Abstracts, Winterthur, CH

  • R. Wruck, D. Wichmann, M. Konrad, S. Köhne, K. Lucka, H. Köhne
    Thermodynamic evaluation of the hydrogen generation from light fuel oil or Diesel for HTPEM fuel cell applications, 2nd European Fuel Cell Technology and Applications Conference – EFC 2007, 11. – 14. December 2007, p. 149 – 150, Rome, Italy

    D. Wichmann, P. Engelhardt, M. Konrad, S. Köhne, K. Lucka, H. Köhne
    Design of a HTPEM fuel cell systems based on methanol steam reforming in a micro-structure device 2nd European Fuel Cell Technology and Applications Conference – EFC 2007, 11. – 14. December 2007, p. 63 – 65, Rome, Italy

    L. Paesler, J. vom Schloß, K. Lucka, H. Köhne, A. Mach, F. von Issendorff, A. Delgado
    Development of a small scale burner for light fuel oil in the power range 1 to 8 KW, COMBURA 2007, Oktober 2007, Book Of Abstracts, Nieuwegen (NL)

    M. Kleingries, H. Ackermann, K. Lucka, H. Köhne
    Effect of sulphur on the oxidation behaviour of nickel-base alloys in synthetic off-gas, EUROCORR 2007, September 2007, CD, Freiburg

    H. Ackermann, M. Kleingries, G. Teneva-Kosseva, K. Lucka, H. Köhne
    Research into the high temperature corrosion of Ni-base alloys related to the application in modern residential oil burners, EUROCORR 2007, September 2007, CD, Freiburg

    M. Konrad, D. Wichmann, R. Wruck, K. Lucka, S. Köhne
    Criteria affecting the selection of system components in highly integrated fuel cell systems based on liquid fuels, 10th Grove Fuel Cell Symposium, September 2007, London (GB)

    A. Medeiros, R. Edenhofer, K. Lucka, H. Köhne
    Steady state determination of fuel-bond nitrogen in diesel and industrial gas oil, 9th International Conference on Energy for a Clean Environment – Clean Air 2007, 02. – 04. July 2007, Book of Abstracts, Seite 49, Povoa de Varzim, Portugal

    A. Fischoeder, K. Lucka, H. Köhne
    Parameter study about combustion of vegetable oil – fuel oil and RME – fuel oil blends in standard fuel oil boilers, 9th International Conference on Energy for a Clean Environment – Clean Air 2007, 02. – 04. July 2007, Book of Abstracts, Seite 50, Povoa de Varzim, Portugal

    O. van Rheinberg, J. vom Schloss, K. Lucka, H. Köhne, Z. Al-Hamamre, D. Trimis
    Development of a Cool Flame Evaporizer and TPOX reformer for the use in SOFC – system, 9th International Conference on Energy for a Clean Environment – Clean Air 2007, 02. – 04. July 2007, Book of Abstracts, Seite 18, Povoa de Varzim, Portugal

    A. Mach, F. von Issendorff, A. Delgado, L. Paesler, J. vom Schloss, K. Lucka, H. Köhne, G. Eberspach, O. Schmidt, H.-P. Sproten, R. Hamacher, E. Issendorff, J. Grodt, R. Mühlenberg, J. Volkert, E. Keim, W. Scholer, A. Morawe, F. Lahmann, H. Volkert
    Development of a small scale burner for light fuel oil in the power range 1 to 8 kW, 9th International Conference on Energy for a Clean Environment – Clean Air 2007, 02. – 04. July 2007, Povoa de Varzim, Portugal

    D. Diarra, K. Lucka, H. Köhne
    Initiation and Stabilization of Cool Flames in a Diesel Fueled Vaporizer, 3rd European Combustion Meeting ECM 2007, 11. – 13. April 2007, Book of Abstracts, Session 21, p. 5, Chania, Greece

    A. Medeiros, R. Edenhofer, K. Lucka, H. Köhne
    Steady state determination of Fuel-bond Nitrogen in Diesel and Industrial Gas Oil, 3rd European Combustion Meeting ECM 2007, 11. – 13. April 2007, Book Of Abstracts, Session 20, p. 3, Chania, Greece

  • G. Teneva – Kosseva, H. Ackermann, H. Köhne, S. Richter, J. Mayer
    Oxidation behaviour of some Ni – Cr – based alloys containing Al or Si during high temperature application in an oil burner, European Corrosion Conference – EUROCORR 2006, European Federation of Corrosion, EFC Event No. 280, September 2006, Maastricht (NL), Book of Abstracts, S. 39

    D. Diarra, S. Velaga, K. Lucka, H. Köhne
    CFD Analysis of mixing and residence time distribution in cool flame vaporizers, European Conference on Computational Fluid Dynamics – ECCOMAS CFD 2006, September, Delft (NL), Book of Abstracts, p. 285

    M. Konrad, R. Wruck, M. Grote, S. Tölle, K. Lucka, H. Köhne
    Two different designs of compact diesel reformers for APU system concepts for PEM fuel cell application, Fuel Cells 2006, Science &Technology, Scientific Advances in Fuel Cell Systems, September, Turin (I), Delegate Manual, 3B.4

    R. Edenhofer, K. Lucka, H. Köhne
    Low Temperature Oxidation of Diesel – Air Mixtures at Atmospheric Pressure, 31th International Symposium on Combustion, University of Heidelberg, August 2006, Abstracts of Symposium Papers, p. 66

    S. Wenzel, M. Grote, C. Mengel, K. Lucka, H. Köhne
    Advances in Diesel reforming with catalytical partial oxidation for fuel cell technology, ACHEMA 2006, 28th International Exhibition – Congress on Chemical Engineering, Environmental Protection and Biotechnology, May 2006, DECHEMA, Frankfurt am Main, S. 205

    A. Fischoeder, C. Mengel, K. Lucka, H. Köhne
    Ablagerungsbildung durch Heizöl EL und durch 5 % Biodiesel – Blend, Beratungsgesellschaft für Mineralöl – Anwendungstechnik mbH, Technische Arbeitstagung Hohenheim, März 2006

    G. Teneva – Kosseva, H. Ackermann, H. Köhne, S. Richter, J. Mayer
    Oxide scale formation on Al – doped Ni – Cr – based high temperature alloys during application as flame tube material in recirculation oil burners, European Federation of Corrosion, EFC Event No. 290, Book of Abstracts and Updated Oral & Poster Programme, Frankfurt am Main, S. 5

  • C. Mengel, M. Konrad, L. Hartmann, K. Lucka, H. Köhne
    Diesel steam reforming for PEM fuel cells, Grove Fuel Cell Symposium, 04. – 06. October 2005, London (GB), P1.15

    M. Grote, M. Konrad, L. Hartmann, C. Mengel, K. Lucka, H. Köhne
    Development of a compact Diesel ATR reformer for an APU Application, Grove Fuel Cell Symposium, 04. – 06. October 2005, London (GB), P1.13

    C. Mengel, M. Konrad, M. Grote, K. Lucka, H. Köhne
    Development of a compact 30 kW Diesel reformer for a PEM APU, H2 EXPO, August 2005, Hamburg

    M. Konrad, L. Hartmann, C. Mengel, K. Lucka, H. Köhne
    Influence of Diesel fuel composition on autothermal reforming process, Polymer Electrolyte Fuel Cell Forum (3rd PEFC-Forum), 04. – 08. July 2005, Luzern (CH), S.46, Poster 401

    M. Konrad, L. Hartmann, C. Mengel, K. Lucka, H. Köhne
    Diesel steam reforming for PEM Fuel Cells, Polymer Electrolyte Fuel Cell Forum (3rd PEFC-Forum), 04. – 08. July 2005, Luzern (CH), S. 47, Poster 402

    M. Grote, M. Konrad, R. Wruck, L. Hartmann, C. Mengel, K. Lucka, H. Köhne
    Development of a 30 kW Diesel ATR Reformer, Polymer Electrolyte Fuel Cell Forum (3rd PEFC-Forum), 04. – 08. July 2005, Luzern (CH), S.51, Session B12

    K. Lucka
    Developments in Cool Flame Technology and its Applications, 8th International Conference on Energy for a Clean Environment – CLEAN AIR VIII, 27. – 30. June 2005, Lisbon (P), Session I.L.6., S.39

    T. H. Brehmer, F. Heger, W. Pölz, K. Lucka, J. vom Schloss, Y. Abu-Sharekh, D. Trimis, F. von Issendorff, A. Heeb, G. Köb, A. Medeiros, T. Hayashi, J. C. F. Pereira, M. Founti, D. Kolaitis, M. Molinari, A. Ortona, J.-B. Michel, P. Theurillat
    Final Presentation of the BIOFLAM Project: Application of Liquid Biofuels in New Heating Technologies for Domestic Appliances Based on Cool Flame Vaporization and Porous Medium Combustion, 8th International Conference on Energy for a Clean Environment – CLEAN AIR VIII, 27. – 30. June 2005, Lisbon (P), Session 12.4, S.50

    K. Lucka, H. Köhne
    Challenges in Diesel Reforming – Comparison of Different Reforming Technologies, 8th International Conference on Energy for a Clean Environment – CLEAN AIR VIII, 27. – 30. June 2005, Lisbon (P), Session 11.2, S. 44

    M. Grote, D. Diarra, R. Edenhofer, C. Mengel, K. Lucka
    Modelling of the low temperature oxidation of liquid hydrocarbons: Influence of pressure and air ratio, ECCOMAS Thematic Conference on Computational Combustion, 21. – 24. June 2005, Lisbon (P) S.16

    R. Edenhofer, D. Diarra, K. Lucka, H. Köhne
    Auto ignition of diesel air mixtures at atmospheric pressure, European Combustion Meeting – 2005, Louvain-La-Neuve (B), Paper 231, S. 88

    C. Mengel, K. Lucka, H. Köhne
    The influence of pressure on the stability limits of mixture preparation by cool flames, European Combustion Meeting – 2005, Louvain-La-Neuve (B), Paper 048, S. 108

  • K. Lucka, H. Ackermann, H. Köhne, L. Lucks
    Metal dusting in low-NOx recirculation burners for fuel oil, Proceedings of the 2004 National Oilheat Research Alliance Technology Symposium – BNL, 23. – 24.August 2004, Providence, Rhode Island (USA), Paper No. 04-04, S. 31-38

  • S. Wenzel, L. Hartmann, H. Köhne, M. Konrad, K. Lucka, C. Mengel
    Sensitivity Analysis of Gas Oil Reforming, DECHEMA – GVC – Jahrestagung, 16. – 18. September 2003, Mannheim

    K. Lucka, L. Hartmann, C. Mengel, H. Köhne
    Cool Flame Evaporation for Diesel Reforming Technology, 7th International Conference on Energy for a Clean Environment – Clean Air VII, 07. – 10. Juli 2003, Book of Abstracts, Seite 132, Lissabon (P)

    T. Brehmer, F. Heger, K. Lucka, J. vom Schloß, Y. Abu-Sharekh, T. Trimis, A. Heeb, G. Köb, T. Hayashi, J. C. F. Pereira, M. Founti, D. Kolaitis, M. Molinari, A. Ortona, J.-B. Michel, P. Theurillat
    BIOFLAM Project: Application of Liquid Biofuels in New Heating Technologies for Domestic Appliances Based on Cool Flame Vaporization and Porous Medium Combustion, 7th International Conference on Energy for a Clean Environment – Clean Air VII, 07. – 10. Juli 2003, Book of Abstracts, Seite 50, Lissabon (P)

    D. Katsourinus, D. Kolaitis, M. Founti, J. vom Schloß, K. Lucka, H. Köhne
    Performance of a Cool Flame Vaporizer for Improved Liquid-fuel Combustion, 7th International Conference on Energy for a Clean Environment – Clean Air VII, 07. – 10. Juli 2003, Book of Abstracts, Seite 178, Lissabon (P)

    S. Mößbauer, T. Hass, J. vom Schloß, K. Lucka, H. Köhne
    Adaption of the Cool Flame Process for Application in a Special Steam Engine for Combined Heat and Power Generation, 7th International Conference on Energy for a Clean Environment – Clean Air VII, 07. – 10. Juli 2003, Book of Abstracts, Seite 162, Lissabon (P)

    L. Hartmann, M. Konrad, M. Grote, K. Lucka, H. Köhne
    Design and Evaluation of Diesel reforming Technology, 2nd European Polymer Electrolyte Fuel Cell Forum (2nd European PEFC-Forum), 30.Juni – 04. Juli 2003, Luzern (CH)

    D. Diarra, C. Mengel, K. Lucka, H. Köhne
    Establishing a Methodology for Safety Analysis of Fuel Cell Heating, 2nd European Polymer Electrolyte Fuel Cell Forum (2nd European PEFC-Forum), 30.Juni – 04. Juli 2003, Luzern (CH)

    R. Edenhofer, K. Lucka, G. Bramlage, H. Köhne,
    Acoustics of Domestic Boilers, 3rd International Conference on Modelling and Experimental Measurements in Acoustics, 16. – 18. Juni 2003, Cadiz

    L. Hartmann, C. Mengel, K. Lucka, H. Köhne
    Cool Flame Evaporation for Diesel Reforming Technology, 8th International Symposium SOFC (SOFC VIII), 29. April 2003, Paris, France, ISBN: 1-56677-377-6

    L. Hartmann, K. Lucka, H. Köhne, C. Mengel
    Multi-Fuel Reformer for SOFC Technologies in Stationary and Automotive Applications, Reihe Energietechnik – “Technical Session: Fuel Cell Systems of the World Renewable Energy Congress VII”, Schriften des Forschungszentrum Jülich, Volume 26, S. 83-87, ISBN: 3-89336-332-7

    C. Mengel, H. Köhne, K. Lucka, L. Hartmann
    Multi-Fuel Premixing Technology for Liquid Hydrocarbons Applicable for E.G. Fame, Fatty ACIDS, IGO and Mixtures, Reihe Energietechnik – “Technical Session: Fuel Cell Systems of the World Renewable Energy Congress VII”, Schriften des Forschungszentrum Jülich, Volume 26, S. 187-191, ISBN: 3-89336-332-7

  • F. Kleine Jäger, B. Becker, C. Junge, G. Walter
    Öfen und Trockner in der Silicatkeramik-Industrie, Das Keramiker-Jahrbuch 2003, Göller Verlag, Dezember 2002, Baden-Baden, ISBN: 3-87264-014-3

    K. Lucka, H. Köhne
    The autothermal evaporation of liquid fuels by using cool flames, Energy Constractions, BNL-52670, Proceedings of the 2002 National Oilheat Research Alliance Technology Symposium, 20. – 21. August 2002, Providence, Rhode Island (USA)

    F. Kleine Jäger, A. Munko, H. Köhne
    Radiant Tube Brenner for Liquid Fuels, In Proceedings of the 6th European Conference on Industrial Furnaces and Boilers, Preprints Vol. I-III, 02. – 05. April 2002, Lisbon (P)

    F. Kleine Jäger, J.-C. Schrag, H. Köhne
    Neues Brenner-Verfahrenskonzept mit Nutzung „Kalte Flammen“  zur Realisierung kleinster Leistungen von 3 kW bis 5 kW, Sitzung des GVC-Fachausschusses „Hochtemperaturtechnik“, 25. – 27. Februar 2002, Karlsruhe

    K. Lucka, N. Steinbach, H. Köhne
    Untersuchungen zum Selbstzündverhalten von Mitteldestillat/Luft Gemischen, Sitzung des GVC-Fachausschusses „Hochtemperaturtechnik“, 25. – 27. Februar 2002, Karlsruhe

  • N. Steinbach, K. Lucka, H. Köhne
    Investigation of the ignition phenomena and the autoignition delay time of IGO/air mixtures in a continuous flow reactor at atmospheric pressure, 6th International Conference on Technologies and Combustion for a Clean Environment – Clean Air 2001, 09. – 12. July 2001, S. 1095-1101, Porto (P)

    F. Kleine Jäger, Y. Wu, J. Zhang, H. Köhne
    New low emission process burner for the combustion of light residual fuel oils, 6th International Conference on Technologies and Combustion for a Clean Environment – Clean Air 2001, 09. – 12. July 2001, S. 645-652, Porto (P)

    A. Munko, F. Kleine Jäger, H. Köhne
    Development of a low NOx radiant tube burner for liquid fuels in the capacity range of 20 kW to 40 kW, 6th International Conference on Technologies and Combustion for a Clean Environment – Clean Air 2001, 09. – 12. July 2001, S. 685-689, Porto (P)

    F. Heger, T. Brehmer, H. Köhne, K. Lucka, F. Durst, D. Trimis, A. Heeb,
    J. C. F. Pereira, M. Founti, M. Molinari, J. B. Michel
    BIOFLAM Project: development of domestics appliances based on cool flame vaporization and porous medium combustion. Control aspects, 6th International Conference on Technologies and Combustion for a Clean Environment – Clean Air 2001, 09. – 12. July 2001, S. 697-698, Porto (P)

    D. Trimis, K. Wawrzinek, O. Hatzfeld, K. Lucka, A. Rutsche, F. Haase, K. Krüger,
    C. Küchen
    High modulation burner for liquid fuels based on porous media combustion and cool flame vaporization, 6th International Conference on Technologies and Combustion for a clean Environment – Clean Air 2001, 09. – 12. July 2001, S. 717-724, Porto (P)

    K. Lucka, H. Köhne
    Fuel Processor for Fuel Cell Applications based on liquid Fuels* 6th International Conference on Technologies and Combustion for a clean Environment – Clean Air 2001, 09. – 12. July 2001, S. 1143-1147, Porto (P)

    K. Lucka, B. Felgenhauer, L. Hartmann, C. Mengel, H. Köhne
    Workshop Brenngaserzeugung für Brennstoffzellen, Wasserstoff aus flüssigen Brennstoffen, 1. Jahrestreffen „Kompetenz Netzwerk Brennstoffzellen“, Landesinitiative Zukunftsenergien, 28. Juni 2001, Duisburg

    C. Mengel, L. Hartmann, K. Lucka, H. Köhne
    Synthesegaserzeugung aus flüssigen Brennstoffen für die Brennstoffzelle, VDI – GET Fortschrittliche Energiewandlung und –anwendung, 13. – 14.März 2001, Bochum

    F. Kleine Jäger, A. Wittmer, H. Köhne
    Entwicklung eines Verfahrens zur Reduzierung der Stickoxide im Abgas durch den Einsatz Kalter Flammen,GVC Fachausschuss “Energieverfahrenstechnik”, 07. März 2001, Würzburg

    J. – C. Schrag, F. Kleine Jäger, H. Köhne
    Einsatz von Thermosiphons zur verbesserten Anpassung der Wärmeübertragung in feuerungstechnischen Anlagen, GVC VDI Fachausschuss “Wärme- und Stoffübertragung”, 5. März 2001, Bamberg

    H. Köhne, K. Lucka, L. Hartmann
    Anwendungsmöglichkeiten der Kalten Flammen in technischen Prozessen, GVC/VDI Fachausschuss “Hochtemperaturtechnik”, 19. – 20. Februar 2001, Aachen

    F. Kleine Jäger, A. Munko, H. Köhne
    Entwicklung eines Low-NOX-Strahlrohr-Brenners für flüssige Brennstoffe im Leistungsbereich von 20 kW bis 40 kW, GVC/VDI Fachausschuss “Hochtemperaturtechnik”, 19. – 20. Februar 2001, Aachen

    K. Lucka, H. Köhne
    Wasserstofferzeugung aus flüssigen Brennstoffen unter Nutzung von Kalten Flammen, 5. Fachkonferenz Zukunftsenergien, Forum “Wasserstoff-Energiewirtschaft NRW”, E-world of energy, 14. Februar 2001, Essen

  • F. Kleine Jäger, H. Köhne
    NOx-arme Verbrennungskonzepte für Heizöl leicht, OMV-Tagung, High Technology & Low Emissions / Neue Verbrennungskonzepte für Heizöl Leicht, 7. November 2000, Wien

    T. Heidermann, A. Rutsche, D. Tanke, O. Hatzfeld, H. Köhne, K. Lucka, I. Rudolphi, F. Durst, D. Trimis, K. Wawrzinek
    The Porous Medium Oil Burner applied to a Houshold Heating System, Second European Conference on small Burner and Heating Technology (ECSBT 2), Volume I, p. 21-28, Stuttgart, 16. – 17. March 2000

    O. Hatzfeld, H. Köhne
    Using radial momentum for flame stabilization, Second European Conference on small Burner and Heating Technology (ECSBT 2), Volume I, p. 63-70, Stuttgart, 16. – 17. March 2000

    N. Steinbach, C. Dötsch, K. Lucka, H. Köhne
    Using ignition delay time to separate the vaporization from the flame zone in an oil fired burner for Stirling engines, Second European Conference on small Burner and Heating Technology (ECSBT 2), Volume I, p. 71-80, Stuttgart, 16. – 17. March 2000

    L. Hartmann, K. Lucka, C. Mengel, H. Köhne
    Design and Test of a Partial Oxidation (POX) Process for Fuel Cell Applications using Liquid Fuels, Second European Conference on small Burner and Heating Technology (ECSBT 2), Volume II, p. 411-418, Stuttgart, 16. – 17. March 2000

    G. Bramlage, H. Köhne
    Sound Emission of Oil-fired Burners and its Influence on Combustion Oscillation, Second European Conference on small Burner and Heating Technology (ECSBT 2), Volume I, p. 141-148, Stuttgart, 16. – 17. March 2000

    A. Munko, N. Steinbach, H. Köhne
    Weiterentwicklung eines emissionsarmen Heizöl-Brenners für den Antrieb eines Stirling-Blockheizkraftwerkes, Stirling Forum 2000, Tagungsband, S. 373-380, Februar 2000, Osnabrück

    F. Kleine Jäger, H. Köhne, D. Goebel, K. Lucka
    Scaling-method for the dimensioning of LowNOX-Burners in the capacity range of 15 kW to 350 kW and 2 MW to 10 MW, 5th European Conference on Industrial Furnaces and Boilers, Volume I, Burners Combustion and Basic Heat Transfer, p. 273 – 283, Porto (P)